Pavestone Porcelain tile protector is pre-grout treatment for use during porcelain paving installation.
The product protects against surface grout residue without altering the paving characteristics.
Available in 1lt and 5lt bottles.
Interior & exterior use Water based pre-grout treatment. For use on all types of textured porcelain tile surfaces. Helps with grout and jointing compound release. On exterior surfaces a further coat can be applied after grouting, which will help with the removal of everyday stains from organic matter.
Directions for use
SHAKE WELL BEFORE USE Always test on an inconspicuous area prior to general application. Preparation: Ensure surface to be treated is completely clean, dry and free from dirt, grime, cement and grout. If necessary, first wash surfaces with a dilute solution of Pavestone Patio Cleaner 1:5 Rinse well to remove residues and leave to dry Application: Before grouting apply evenly to the surface using a broad paint brush, foam roller or light pressure sprayer. Allow to dry for 30 minutes. Apply a second coat. Leave to cure for a minimum of 1 hour before grouting or pointing. Once pointing is dry and all residues have been removed a further coat of protector can be applied covering the joints as well. Hard to remove dried on cement stains can be removed using Pavestone Cement &Grout Residue Remover. Hard to remove dried on cement stains can be removed using Pavestone Cement &Grout Residue Remover. Hard to remove stains from jointing compounds can be removed using Pavestone Resin residue remover..
1 Liter covers approx 30m2 of Porcelain Tiles
5 Liter covers approx 50m2 of Porcelain Tiles
|Pavestone Porcelain Tile Protector - 5L Bottle||Pavestone Porcelain Tile Protector - 1L Bottle|
|No. of Pieces||1||1|
|Range||Pavestone Protect||Pavestone Protect|
|Prod Type||Paving Sealer||Paving Sealer|
|Pack Contents||5L Bottle||1L Bottle|
|Pack Sold As||Individual Unit||Individual Unit|
1 x Bottle 5L
1 x Bottle 1L
Usually replenished within days