Crosswood Coco Paving Slabs - 1200 x 300 x 20 mm Single Size

Crosswood Porcelain tiles are carefully machine rectified to give a calibrated, dimensional accuracy upon the tile. This enables closer jointing so that the tiles appear as one large uninterrupted, seamless surface of flooring. Thus resulting in a contempary look and adding value to your home.

A rectified floor tile is one whose edges are perfectly vertical with respect to its surface. This is a result of precise machining of a regular unrectified tile, so that each of the four sides will be at a 90° angle to the top and bottom faces of the tile.

As with all paving, it is essential to lay the paving by mixing the tiles from each of the packs that are to be laid. This ensures that the overall desired hue is achieved and evens out any slight colour discrepancies. Laying your patio one pallet at a time can lead to slight but visible colour banding.

It is essential to use a Slurry Primer, which should be applied to the underside of each paving tile just prior to laying. The base mortar should contain an SBR Bond additive included within the mix. Please refer to the laying instructions if in any doubt.

A flexible Jointing Grout should be used and care must be taken not to let it dry on the surface of the tile.

If you require any additional information on laying our Porcelain, please give us a call on 01993 608 824 and speak to our dedicated Paving Expert Team.